Model
NE-Q05P
General specifications
Current consumption.
2.2 A
Power voltage
24 VDC ± 10%
Operating ambient temperature
0 to +50°C 32 to 122°F *1 (no freezing)
Operating ambient humidity
10 to 95%RH (no condensation)
Storage ambient temperature
-20 to +70°C -4 to 158°F
Operating environment
Minimal amount of dust and corrosive gas present
Operating altitude
2000m or less
Noise immunity
1,500 Vp-p, pulse width: 1 µs, 50 ns (by way of a noise simulator)
Withstand voltage
1,500 VAC for 1 minute between the power supply terminal and the communication terminal and between all the external terminals and the case
Insulation resistance
50 MΩ or more (tested with a 500 VDC megger, between the power supply terminal and the communication terminal and between all the external terminals and the case)
Shock resistance
Acceleration: 150 m/s2, operating time: 11 ms, 2 times in each of the X, Y, and Z directions
Overvoltage category
I
Pollution degree
2
Vibration resistance
Intermittent vibration
Frequency: 10 to 57 Hz
Amplitude: 0.075 mm*2
Frequency: 57 to 150 Hz
Acceleration: 9.8 m/s2*2
Continuous vibration
Frequency: 10 to 57 Hz
Amplitude: 0.035 mm*2
Frequency: 57 to 150 Hz
Acceleration: 4.9 m/s2*2
Weight
Approx 260g
Function/performance specifications
Data transfer speed
10 Mbps, 100 Mbps, automatic support for full duplex and half duplex modes
MDI/MDI-X automatic switching function
Provided
Auto-negotiation function
Communicationspecifications
MAC address retention
300 s
Function/performance specifications
Upper limit for the number of MAC addresses that can be registered
2048
QoS function
Priority control of EtherNet/IPTM cyclic data
PoE function
2 ports, conforms to IEEE802.3af, supply power: 15.4 W/port (44 to 57 VDC)
Communicationspecifications
Switching type
Store and forward method
Metal cable
Flow control
Half duplex: back pressure, full duplex: conforms to IEEE802.3x; pose packets are used to perform flow control
*1 This is regulated according to the temperature below the control panel unit.
*2 Conforms to JIS B 3502
IEC61131-2, 10 times respectively in the X, Y, and Z directions, 80 minutes
