Keyence NE-Q05

SKU: NE-Q05
Hãng sản xuất: Keyence
Chất lượng: Mới 100%
Bảo hành: Chính hãng
Chứng từ: CO/CQ, hóa đơn VAT

Mã sản phẩm: NE-Q05 Danh mục: , ,
Liên hệ báo giá

Model
NE-Q05

General specifications
Current consumption.
180 mA

Power voltage
24 VDC ± 10%

Operating ambient temperature
0 to +50°C 32 to 122°F *1 (no freezing)

Operating ambient humidity
10 to 95%RH (no condensation)

Storage ambient temperature
-20 to +70°C -4 to 158°F

Operating environment
Minimal amount of dust and corrosive gas present

Operating altitude
2000m or less

Noise immunity
1,500 Vp-p, pulse width: 1 µs, 50 ns (by way of a noise simulator)

Withstand voltage
1,500 VAC for 1 minute between the power supply terminal and the communication terminal and between all the external terminals and the case

Insulation resistance
50 MΩ or more (tested with a 500 VDC megger, between the power supply terminal and the communication terminal and between all the external terminals and the case)

Shock resistance
Acceleration: 150 m/s2, operating time: 11 ms, 2 times in each of the X, Y, and Z directions

Overvoltage category
I

Pollution degree
2

Vibration resistance
Intermittent vibration
Frequency: 10 to 57 Hz
Amplitude: 0.075 mm*2

Frequency: 57 to 150 Hz
Acceleration: 9.8 m/s2*2

Continuous vibration
Frequency: 10 to 57 Hz
Amplitude: 0.035 mm*2

Frequency: 57 to 150 Hz
Acceleration: 4.9 m/s2*2

Weight
Approx 180g

Function/performance specifications
Data transfer speed
10 Mbps, 100 Mbps, automatic support for full duplex and half duplex modes

MDI/MDI-X automatic switching function
Provided

Auto-negotiation function

Communicationspecifications
MAC address retention
300 s

Function/performance specifications
Upper limit for the number of MAC addresses that can be registered
2048

QoS function
Priority control of EtherNet/IPTM cyclic data

PoE function
None

Communicationspecifications
Switching type
Store and forward method

Metal cable
Flow control
Half duplex: back pressure, full duplex: conforms to IEEE802.3x; pose packets are used to perform flow control

*1 This is regulated according to the temperature below the control panel unit.
*2 Conforms to JIS B 3502
IEC61131-2, 10 times respectively in the X, Y, and Z directions, 80 minutes