Model
KL-8BXR
General specifications
Disconnection error output load
30 VDC, 0.1 A or less, residual voltage: 1 V or less
Vibration resistance
10 to 55 Hz, 1.5 mm or less double amplitude for 2 hours in each of the X, Y, and Z directions; 1 G when attached to a DIN rail
Insulation system
–
Power voltage
10.8 to 26.4 VDC (for the connector type I/O unit, this is supplied by the dedicated cable)
Operating ambient temperature
0 to 60°C
Operating ambient humidity
35 to 85%RH (no condensation)
Operating environment
No corrosive gas present
Noise immunity
Power supply common: 1,500 V, power supply normal: 500 V, pulse width: 1 ms, 50 ns (by way of a noise simulator)
Withstand voltage
500 VAC for 1 minute (between the power supply terminal and the I/O terminals; excluding the ERR output terminal)
Insulation resistance
–
Performance specifications
Input maximum rating
Input voltage
Minimum ON voltage
Maximum OFF current
Maximum OFF voltage
Input impedance
Number of inputs/outputs
8 DC inputs + 8-terminal terminal block relay output
Internal current consumption
250mA or less
Weight
approx 190g
Output specifications
Output
–
Residual voltage (when output is ON)
Leakage current (when output is OFF)
transistor output
Rated load voltage
Rated output current
Common ground
ON delay time
OFF delay time
Insulation resistance
Insulation system
relay output
Rated voltage
AC250V/DC30V
Rated output current
2 A/output (inductive load), 4 A/output (resistive load), 4 A/all commons
Common ground
Written on the terminal wiring diagram of each unit
ON resistance
50 mΩ or less
ON delay time
10ms or less
OFF delay time
Insulation resistance
20 MΩ or more (tested with a 500 VDC megger, between the power supply terminal and the I/O terminals; excluding the ERR output terminal)
Insulation system
Relay isolation
