Model
KL-16BX
General specifications
Disconnection error output load
30 VDC, 0.1 A or less, residual voltage: 1 V or less
Vibration resistance
10 to 55 Hz, 1.5 mm or less double amplitude for 2 hours in each of the X, Y, and Z directions; 1 G when attached to a DIN rail
Insulation system
Photocoupler isolation
Power voltage
10.8 to 26.4 VDC (for the connector type I/O unit, this is supplied by the dedicated cable)
Operating ambient temperature
0 to 60°C
Operating ambient humidity
35 to 85%RH (no condensation)
Operating environment
No corrosive gas present
Noise immunity
Power supply common: 1,500 V, power supply normal: 500 V, pulse width: 1 ms, 50 ns (by way of a noise simulator)
Withstand voltage
500 VAC for 1 minute (between the power supply terminal and the I/O terminals; excluding the ERR output terminal)
Insulation resistance
20 MΩ or more (tested with a 500 VDC megger, between the power supply terminal and the input terminals; excluding the ERR output terminal)
Performance specifications
Input maximum rating
DC26.4V
Input voltage
24 VDC, 5.3 mA (24 V mode); 5 VDC, 0.9 mA (5 V mode)
Minimum ON voltage
19 V (24 V mode), 2.5 V (5 V mode)
Maximum OFF current
2 mA (24 V mode)
Maximum OFF voltage
0.8 V (5 V mode)
Input impedance
4.3 kΩ
Number of inputs/outputs
16, terminal block DC input
Internal current consumption
75mA or less
Weight
approx 140g
Output specifications
Output
–
Residual voltage (when output is ON)
Leakage current (when output is OFF)
transistor output
Rated load voltage
Rated output current
Common ground
ON delay time
OFF delay time
Insulation resistance
Insulation system
relay output
Rated voltage
Rated output current
Common ground
ON resistance
ON delay time
OFF delay time
Insulation resistance
Insulation system
