IFM TW2011
Product characteristics
Number of inputs and outputs
Number of digital outputs: 1; Number of analogue outputs: 1
Measuring range
300…1600 °C
572…2912 °F
Application
Application
tempering temperatures; glass melting; graphite; ceramics; metals; forging; sintering; heat treatment; rolling
Electrical data
Operating voltage [V] 18…32 DC; (to SELV/PELV)
Current consumption [mA] 600 °C)
Software / programming
Adjustment of the switch point
programming buttons
Parameter setting options
analogue range; normally open / normally closed; switch-on/switch-off delay; Damping; Peakhold; emissivity; simulation function
Interfaces
Communication interface
IO-Link
Transmission type
COM2 (38,4 kBaud)
IO-Link revision
1.1
SDCI standard
IEC 61131-9
SIO mode
yes
Required master port type
A
Process data analogue
16
Process data binary
1
Min. process cycle time [ms] 3.6
Supported DeviceIDs
Type of operation
DeviceID
Default
719
Operating conditions
Ambient temperature [°C] 0…65
Note on ambient temperature
fibre optics and measuring head: -20…250 °C
Storage temperature [°C] -20…80
Max. relative air humidity [%] 95; (non condensing)
Protection
IP 65
Mechanical data
Weight [g] 899.5
Housing
threaded type
Dimensions [mm] M30 x 1.5
Thread designation
M30 x 1.5
Fibre optic connection
¼”-36UNS-2A
Materials
threaded sleeve: stainless steel (1.4305 / 303); polyester
Lens material
tempered optical glass
Displays / operating elements
Display
Display unit
2 x LED, yellow
switching status
1 x LED, yellow
function display
7-segment LED display, 4-digit
measured values
7-segment LED display, 4-digit
Operating elements
3
pushbuttons
Accessories
Accessories (supplied)
lock nuts: 2
fibre optic: 2 m
Measuring head
Remarks
Remarks
Use a screened cable to protect infrared temperature sensors from interference.
The screen must be connected to the housing of the sensor via the connector.
On delivery the sensor is premounted and calibrated and is supplied with 2 m fibre optic.
If the fibre optic is replaced the sensor has to be recalibrated (ZC0062).
Pack quantity
1 pcs.
Electrical connection
Connection
Connector: 1 x M12
