Product characteristics
Number of inputs and outputs
Number of digital outputs: 2; Number of analogue outputs: 1
Measuring range [gpm] 0.02…19.82
Process connection
3/4″ NPT DN20
Application
Special feature
Gold-plated contacts
Media
conductive liquids; water; hydrous media
Note on media
conductivity: ≥ 20 µS/cm
viscosity: 5 % MEW)
Response times
Flow monitoring
Start-up delay [s] 0…50
Response time [s] 10 % MEW, T09)
Software / programming
Parameter setting options
hysteresis / window; normally open / normally closed; switching logic; frequency output; current/pulse output; start-up delay; display can be deactivated; Display unit
Interfaces
Communication interface
IO-Link
Transmission type
COM2 (38,4 kBaud)
IO-Link revision
1.1
SDCI standard
IEC 61131-9
Profiles
Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis
SIO mode
yes
Required master port type
A
Process data analogue
3
Process data binary
2
Min. process cycle time [ms] 6
Supported DeviceIDs
Type of operation
DeviceID
Default
958
Operating conditions
Ambient temperature [°F] -4…140
Storage temperature [°F] -13…176
Protection
IP 65; IP 67
Mechanical data
Weight [g] 848.9
Materials
stainless steel (1.4408/316); stainless steel (1.4404 / 316L); PC; PBT+PC-GF30
Materials (wetted parts)
stainless steel (1.4404 / 316L); PEEK; carbon fibre PEEK; FKM
Process connection
3/4″ NPT DN20
Displays / operating elements
Display
colour display 1,44″, 128 x 128 pixels
2 x LED, yellow
Remarks
Remarks
MW = measured value
MEW = Final value of the measuring range
Pack quantity
1 pcs.
Electrical connection
Connection
Connector: 1 x M12; Contacts: gold-plated
