Model
PR-G41N
Type
Diffuse reflective (Long distance)
Shape
Rectangular
Output
NPN
Cable connection
2 m cable
Detecting distance
500 mm19.685″
Number of control outputs
2 (Dark-ON +Light ON)*1
Output operation
Output 1
Light-ON
Output 2
Dark-ON*2
Response time
0.5 ms
Sensitivity adjustment
Five-turn trimmer
Spot diameter
ø20 mm ø0.79″ max.
(at 300 mm 11.81″)
Light source
4 elements, Point light source red LED (650 nm)
Light interference prevention function
2
Indicator lamp
7 segment display (0 to 999), output indicator (yellow)
Control output
NPN open collector
30 VDC or less, 100 mA or less
Residual voltage: 1.2 V or less at less than 10 mA, 2 V or less at 10 to 100 mA
Stop emission input
―
Protection circuit
Protection against reverse power connection, power supply surge, output overcurrent, output surge, and reverse output connection
Rating
Power voltage
10 to 30 VDC, including Ripple (P-P) 10 %
Power consumption
450 mW max. (15 mA max. at 24 V, 21 mA max. at 12 V)
Environmental resistance
Enclosure rating
IP68 (IEC60529), IP69K (DIN40050-9),
4X, 6P, 13 (NEMA250)*3
Insulation resistance
20 MΩ or more (500 VDC)
Ambient light
Incandescent lamp: 5,000 lux or less, Sunlight: 20,000 lux or less
Ambient temperature
-20 to +70 °C -4 to 158 °F (No freezing)*4
Storage temperature
-20 to +70 °C -4 to 158 °F
Relative humidity
35 to 85 % RH (No condensation)
Withstand voltage
1,000 VAC, 50/60 Hz, 1 min
Vibration resistance
10 to 55 Hz, Double amplitude 1.5 mm 0.06″, 2 hours in each of the X, Y, and Z directions
Shock resistance
1,000 m/s2, 6 times in each of the X, Y, and Z directions
Material
Case: SUS 316L,
Indicator cover: PES,
7-segment display cover/Lens cover: PMMA (scratch-resistant coating)
M18 nut: Brass (Nickel plating),
Lock washer: Steel (Chrome plating)
Accessories
Instruction manual
Weight
Approx. 75 g
*1 For the threaded mount type sensors, the outputs are 1 NPN output and 1 PNP output.
*2 Output 2 is not available on the threaded mount type or M8 3-pin type.
*3 For the connector type, the enclosure rating varies depending on the cable that is used.
*4 When the ambient temperature is 60 °C 140 °F or higher, the device should be powered with no more than 24 VDC and 50 mA.
